Copper sets is an important component of the cone crusher, such as copper eccentric shaft sleeve, moving cone copper sleeve and the horizontal axis copper sets, during operation of the device plays a very important role, let's look at the cone crusher copper sleeve Replace.
Replace the eccentric shaft sleeve of copper
After locking filler hole drilling broken, then rewind the eccentric sleeve, copper sleeve can be removed. Before installing new copper sets, you must check whether the eccentric sleeve hole size cracks. When installing copper eccentric shaft sleeve, cooled with dry ice available. When pouring locking filler, eccentric and copper sleeve must be at a temperature of about 70 degrees, eccentric copper sleeve hole must be positive.
Replacing copper moving cone sleeve
Moving cone copper sleeve can be cut out, but make sure not to damage the dynamic cone bore. Moving cone copper sleeve can be directly drawn out, it can be cooled with dry ice to speed up the pull-out speed. Dry Ice is available when installing the moving cone brass sleeve, each need at least 2 hours when fully cooled after, with its rings to lift copper sleeve, from under the rings to use flat gaskets to ensure copper sleeve edges and the bottom edge of the movable cone parallel.
Replace the horizontal axis of the copper sleeve
Outer copper sheath can be removed by pulling device made within the copper sleeve can be removed using a center rod means hammering out the copper sleeve split out, you need to check the inner shaft holder hole size is reasonable. When installing the horizontal axis copper sets, use a dry ice shrink at least 2 hours.
2015年8月13日星期四
2015年8月12日星期三
What are the advantages of the new jaw crusher broken machine
China Jiaozuo in Henan Xin Heavy jaw broken machine factory is the leading manufacturer of crushing equipment, the new JC jaw crusher is the company nearly two years, successfully developed high-efficiency crushing equipment market, along with rough broken machine, broken machines and Crusher's function, in the gravel crushing many advantages, therefore, as the new generation of sand mining machinery industry darling broken, today we look at what are JC Jaw Crusher crushing advantage.
First, the jaw crusher can be used for medium-sized gravel plant, where thick broken machine is the preferred mining crushing equipment, machine structure is simple, easy to operate, using extrusion crushing principle, crushing intensity, low prices, consumable wear-resistant alloy materials processing, post-maintenance costs relatively low, is a more economical and practical crusher equipment.
Second, the lubrication system and dust removal device more complete, reducing the friction between the brackets, linings, bearings and other parts, to improve the life of the crusher parts, reducing maintenance and replacement costs, but also improve the Jaw Crusher crushing efficiency equipment; dust removal device can absorb a lot of dust, there is one that is both energy-saving and environmental protection of the crusher.
Third, jaw crusher is used in self-control design, the fuselage relatively high security factor, broken jaw when the first time machine failure can take on their own means to solve, for example, when the crushing cavity material too, jaw crusher equipment card machine, the bracket will be automatically broken jaw broken machine protected from damage.
Broken jaw broken machine on the advantages of China jaw broken machine manufacturers to introduce the above three points, but this is our crusher future trends to provide our jaw crusher manufacturers to introduce innovative technologies and on their own crusher continuous improvement, so that crushing function to the next level, if you wish to understand our jaw crusher can call our hotline or visit our web site.
First, the jaw crusher can be used for medium-sized gravel plant, where thick broken machine is the preferred mining crushing equipment, machine structure is simple, easy to operate, using extrusion crushing principle, crushing intensity, low prices, consumable wear-resistant alloy materials processing, post-maintenance costs relatively low, is a more economical and practical crusher equipment.
Second, the lubrication system and dust removal device more complete, reducing the friction between the brackets, linings, bearings and other parts, to improve the life of the crusher parts, reducing maintenance and replacement costs, but also improve the Jaw Crusher crushing efficiency equipment; dust removal device can absorb a lot of dust, there is one that is both energy-saving and environmental protection of the crusher.
Third, jaw crusher is used in self-control design, the fuselage relatively high security factor, broken jaw when the first time machine failure can take on their own means to solve, for example, when the crushing cavity material too, jaw crusher equipment card machine, the bracket will be automatically broken jaw broken machine protected from damage.
Broken jaw broken machine on the advantages of China jaw broken machine manufacturers to introduce the above three points, but this is our crusher future trends to provide our jaw crusher manufacturers to introduce innovative technologies and on their own crusher continuous improvement, so that crushing function to the next level, if you wish to understand our jaw crusher can call our hotline or visit our web site.
2015年8月11日星期二
XHP Series Hydraulic Cone Crusher
Photo：
Brief Introduction：
XHP series high efficiency Hydraulic Cone Crusher is a world-level cone crusher developed from the up-to-minute technology of America. The cone crusher not only improves the production capacity and crushing efficiency, but also widens the applying area, from limestone to basalt, from stone production to various ore crushing. It has a second-to-non crushing performance in the work of medium-size crushing, fine crushing and super fine crushing. The crusher is the improved type of spring cone crusher and can be used to replace ordinary hydraulic cone crusher
Specifications：
Brief Introduction：
XHP series high efficiency Hydraulic Cone Crusher is a world-level cone crusher developed from the up-to-minute technology of America. The cone crusher not only improves the production capacity and crushing efficiency, but also widens the applying area, from limestone to basalt, from stone production to various ore crushing. It has a second-to-non crushing performance in the work of medium-size crushing, fine crushing and super fine crushing. The crusher is the improved type of spring cone crusher and can be used to replace ordinary hydraulic cone crusher
Specifications：
Model
|
Cavity
|
Standard Type
|
Short Type
|
Power
|
Capacity (t/h)
|
||
|
Feeding Size (mm)
|
Min Discharging Size (mm)
|
Feeding Size (mm)
|
Min Discharging Size (mm)
|
(kw)
|
|||
|
XHP200
|
Super coarse
|
|
|
|
|
132-200
|
90-250
|
|
Coarse
|
185
|
19
|
76
|
10
|
|||
|
Medium
|
125
|
17
|
54
|
6
|
|||
|
Fine
|
95
|
13
|
23
|
6
|
|||
|
Super Fine
|
|
|
10
|
5
|
|||
|
XHP300
|
Super coarse
|
230
|
25
|
|
|
180-250
|
115-440
|
|
Coarse
|
210
|
20
|
75
|
10
|
|||
|
Medium
|
150
|
15
|
50
|
8
|
|||
|
Fine
|
105
|
10
|
20
|
6
|
|||
|
Super Fine
|
|
|
20
|
6
|
|||
|
XHP400
|
Super coarse
|
295
|
30
|
|
|
280-355
|
140-630
|
|
Coarse
|
250
|
25
|
90
|
10
|
|||
|
Medium
|
195
|
20
|
50
|
8
|
|||
|
Fine
|
110
|
14
|
40
|
6
|
|||
|
Super Fine
|
|
|
30
|
6
|
|||
|
XHP500
|
Super coarse
|
330
|
30
|
|
|
355-450
|
175-790
|
|
Coarse
|
285
|
25
|
90
|
13
|
|||
|
Medium
|
200
|
20
|
55
|
10
|
|||
|
Fine
|
133
|
16
|
40
|
8
|
|||
|
Super Fine
|
|
|
35
|
6
|
|||
|
XHP800
|
Super coarse
|
353
|
32
|
|
|
550-630
|
260-1200
|
|
Coarse
|
297
|
32
|
155
|
13
|
|||
|
Medium
|
267
|
25
|
92
|
10
|
|||
|
Fine
|
219
|
16
|
33
|
6
|
|||
|
Super Fine
|
|
|
|
| |||
2015年8月7日星期五
Mine Stone Crushing Sysmons Cone Crusher Machine
Product Description
Description of Mine Stone Crushing Sysmons Cone Crusher Machine:
PY Series spring cone crusher is one of the first cone crusher, and it's based on the old cone crusher development and improvement of a new crusher. Mainly used in secondary crushing and teriary finely crushing. The machine insurance system using spring overload protection, dry oil (or water) sealed form, the user can choose a standard type based on ore purposes PYB, PYD short head type, PYZ medium crushing chamber.
Product Applications
Applications of Mine Stone Crushing Sysmons Cone Crusher Machine:
It is widely used in industries of metallurgy, architecture, road construction, chemical industry, phosphate. It is the preferred choice for secondary crushing equipment which is used for hard and medium mineral rock such as iron ore, copper ore, limestone, quartz, granite, basalt and dolerite.
It is widely used in industries of metallurgy, architecture, road construction, chemical industry, phosphate. It is the preferred choice for secondary crushing equipment which is used for hard and medium mineral rock such as iron ore, copper ore, limestone, quartz, granite, basalt and dolerite.
Product Features
Features of Mine Stone Crushing Sysmons Cone Crusher Machine:
1. Larger capcity achieved by the design of larger crush throw
2. Setting of discharge opening is hydraulic drive
3. Grease seal reduces dust contamination effectively
4. Cavities of standard or short head are changeable through different mantles and bowl liners
5. Hydraulic overload protection device helps to remove tramp iron and reduce downtime
6. Thin oil lubrication station is outfitted with air_conditioning cooling system for better cooling performance.
2. Setting of discharge opening is hydraulic drive
3. Grease seal reduces dust contamination effectively
4. Cavities of standard or short head are changeable through different mantles and bowl liners
5. Hydraulic overload protection device helps to remove tramp iron and reduce downtime
6. Thin oil lubrication station is outfitted with air_conditioning cooling system for better cooling performance.
2015年8月6日星期四
ZSW Series Vibrating Feeder
ZSW Series Vibrating Feeder
Introduction
ZWS Series Vibrating Feeder is mainly used to feed material into the primary crusher homogeneously and continuously. Meanwhile, it can screen the fine material and make the crusher more powerful.Characteristic
Smooth vibratingspecial fence can prevent the block of raw material
The distance between fences is adjustable
Frequency conversion motor can be equipped to facilitate feeding control, and frequent startup of motor is avoided.
Specifications
| Model | Max Feed Size(mm) | Capacity (t/h) | Motor Power (L*W*H) (kw) | Overall Dimensions (mm) | Weight (kg) | Size of Funnel(mm) |
| ZSW-380*95 | 500 | 96-160 | 11 | 3882*2224* 2121 | 4082 | 3800*950 |
| ZSW-490*95 | 500 | 120-240 | 15 | 4957*2277* 2150 | 5004 | 4900*950 |
| ZSW-490*110 | 580 | 120-280 | 15 | 4957*2400* 2150 | 5320 | 4900*1100 |
| ZSW-590*110 | 600 | 200-350 | 22 | 6000*2500* 2150 | 6130 | 5900*1100 |
| ZSW-600*130 | 750 | 400-560 | 22 | 6082*2580* 2083 | 7800 | 6000*1300 |
| ZSW-600*150 | 1000 | 800 | 30 | 6627*2350* 3068 | 12110 | 6000*1500 |
| ZSW-600*200 | 1000 | 1200 | 37 | 6436*3853* 3014 | 18650 | 6000*2000 |
2015年8月3日星期一
Symons cone crusher and jaw crusher
Introduction
symons crusher is mainly used to feed material into the
primary crusher homogeneously and continuously. Meanwhile, it can screen
the fine material and make the crusher more powerful.
Symons Cone Crusher
Product Description
Symons Cone Crusher Application:
Symons cone crusher is widely used in the industries of metallurgy, building material, road construction, chemical engineering and silicate. It is suitable for crushing all kinds of ores and rocks with hardness of medium or above.
Symons cone crusher is widely used in the industries of metallurgy, building material, road construction, chemical engineering and silicate. It is suitable for crushing all kinds of ores and rocks with hardness of medium or above.
Symons Cone Crusher Feature:
It has the advantages of high crushing ratio, high efficiency, high capacity, low operating cost, easy adjustment and economical operation.
High quality of its components' raw material and reasonable structure design contributes to its longer running performance and even granularity of the crushed product in order to reduce the circulation load. Furthermore, by introducing the hydraulic clear chamber into the crusher of middle and large size, the down time is reduced accordingly. The customers can choose different type of chamber upon different request freely, because the wide ranges of products are provided.
Symons Cone Crusher Working Principle:
This series crusher adopts grease sealing so as to prevent the watering and draining system from being blocked and avoid the defect of easy mix of water and oil. The spring safety system is the protection unit against overload, and it can keep the crushing chamber from damaged by foreign substance or iron pieces.
It has the advantages of high crushing ratio, high efficiency, high capacity, low operating cost, easy adjustment and economical operation.
High quality of its components' raw material and reasonable structure design contributes to its longer running performance and even granularity of the crushed product in order to reduce the circulation load. Furthermore, by introducing the hydraulic clear chamber into the crusher of middle and large size, the down time is reduced accordingly. The customers can choose different type of chamber upon different request freely, because the wide ranges of products are provided.
Symons Cone Crusher Working Principle:
This series crusher adopts grease sealing so as to prevent the watering and draining system from being blocked and avoid the defect of easy mix of water and oil. The spring safety system is the protection unit against overload, and it can keep the crushing chamber from damaged by foreign substance or iron pieces.
Symons Cone Crusher types:
It can be divided into the standard type and the short head type. Normally the large size of material is fed into the standard type, which means that the size of discharge is also coarser; And the small size of the material is fed into the short head type due to its steep crushing cone, which will unavoidably influence the size of discharge, therefore, it is much more suitable for producing the fine goods. Consequentially the standard type is generally used for medium and coarse material, and the short head type is for medium and fine material.
It can be divided into the standard type and the short head type. Normally the large size of material is fed into the standard type, which means that the size of discharge is also coarser; And the small size of the material is fed into the short head type due to its steep crushing cone, which will unavoidably influence the size of discharge, therefore, it is much more suitable for producing the fine goods. Consequentially the standard type is generally used for medium and coarse material, and the short head type is for medium and fine material.
| specifications | style | chamber type | broken cone main diameter (mm) | Adjustable Range of Output Size (mm) | mouth edge feeding size in the min recommended discharging port(mm) | max feeding size (mm) | capacity (t/h) | motor power (kw) | weight (kg) | overall dimension (L× W× H)(mm) |
| 900 | PSGB-0910 | standard thin | 914 | 9-22 | 102 | 85 | 45-91 | 75 | 9980 | 2656× 1636× 2241 |
| PSGB-0917 | standard thick | 13-38 | 1775 | 150 | 59-163 | |||||
| PSGB-0918 | standard thicker | 25-38 | 178 | 150 | 118-163 | |||||
| PSGB-0904 | Short head thin | 3-13 | 41 | 35 | 27-90 | 10530 | ||||
| PSGB-0906 | Short head medium | 3-16 | 76 | 65 | 27-100 | |||||
| PSGB-0907 | Short head thick | 6-19 | 102 | 85 | 59-129 |
订阅：
评论 (Atom)